LushMotif · Clay tool studio
One studio,
every tool you make.
Design your own polymer clay cutters, stamps, embossers, stencils and rollers in the browser. Shape it in 2D, watch it build in 3D, then print it yourself or order it made.
Tired of juggling three apps, and designing in tools never made for artists?
Upload-and-trace apps are converters: you get an outline and not much else. Anything more considered means Illustrator for the drawing and CAD for the walls, and CAD was built for engineers, not for artists making statement pieces. This is a full vector studio and 3D workshop in one, made for the way artists work: draw it, trim it, repeat it, and build it as a print-ready cutter, stamp, embosser, stencil or roller. It costs more than a simple upload-and-trace tool because it replaces one. See exactly what’s different
The brush is the wall
Draw in the thickness you print.
In Fusion a line has no width. You sketch it, offset it to make a wall, close the ends and trim the overlaps before you can extrude anything. Here the brush is the wall: set your thickness, draw, and every stroke is exactly what prints. No more offset lines. Real vector drawing, with the brush Fusion never had.
Five steps before you have a wall
- Sketch a line
- Offset it
- Close the ends
- Trim overlaps
- Extrude
Draw it, and it is the wall
- Set wall thickness
- Draw with the brush
- Print as drawn
Five ways to make
One design, five tools.
Switch make-mode in a click. The whole design carries across, and each mode builds the right 3D part for you automatically.
Cutter
Sharp-bladed cutters with a solid base, inner imprints and score lines.
Stamp
Press stamps with a snap-fit handle, your design raised or recessed on the face.
Embosser
Relief plates that leave your motif pressed into the clay surface.
Stencil
Cut-through stencils for painting, texture paste and layered work.
Roller
Textured rollers with seamless, endlessly repeating pattern tiling.
The toolkit
Everything in the box.
A full vector studio built for makers. Draw it, shape it, repeat it, and see it print-ready before you ever slice.
Draw and shape
- Shape library square, rounded, circle, ellipse, triangle, polygon, star, hexagon, heart and flower, with live sides, points and petals
- Pen, freehand and line full bezier curves, brush strokes and straight runs
- Node editing reshape any point after the fact
- Corner styles round, concave or cut-out, with a radius dial
- Fill and paint bucket outline or solid, per shape
- Measure tool snaps to nodes for exact sizing
- Layers panel organise, stack and reorder every part of a design
- Multiple image import bring in several reference images without erasing the work already on the board
Combine and trim
- Frame and Full combine fuse shapes into one solid, or weld outlines together
- Booleans unite, subtract, intersect
- Offset paths grow or inset any outline precisely
- Trim Fusion-style: remove a segment, or weld the survivors into one shape
- Micro Trim delete one overlapping line at a time to interlink shapes into clean, woven forms
Layout and precision
- Live mirror vertical, horizontal, quad or radial symmetry that updates as you draw
- Radial repeat clone a motif evenly around a centre, with live count, centre and spacing
- Mirrored pair generate a matched left and right
- Align and snapping centre and edges, with wall-aware snapping so tiny cutters never bleed off the board
- Guides, rulers and canvas presets 10, 20, 30 or 60 mm or custom, and every mode keeps its own size
- Earring backing guides proprietary guides for earring designs, included with Usta
Live 3D and blade
- Real-time 3D preview Draw (solid), Sketch (technical) and Split views
- Brush at print thickness every stroke is drawn at the exact wall width it will print, centred, inside or outside. No offset lines, no Expand Stroke step
- Multi-height extrusion give different parts of one design different heights
- Sharp blade tapered cutting edge with adjustable chamfer
- Frame and base outer frame, open or closed base, follow, square or circle base shape, base width and rounded corners
- Frame support chamfered brace that stiffens thin walls
- Threaded grip detachable M5 or M6 snap handle that auto-fits any size
- Connectors tie inner pieces to the frame for one solid print
Print and inspect
- Watertight STL export one clean manifold, no slicer splitting
- Print check flags thin walls and tight gaps, with “show me” markers on every spot
- Section analysis slice the model open, left to right, front to back or by height, to inspect inside
- Image tracer drop a photo for auto black and white, background removal, centre and fit, then fine-tune
- Reference layer trace over a backing image that never prints
Library and workflow
- Motif library save master motifs and drop linked copies. Fix the master and every copy updates
- Pattern engine turn motifs into repeating patterns
- Presets save a whole-piece setup and reapply it in one tap
- Autosave and restore every design remembers its mode and 3D settings
- Dark mode a warm, low-glare studio at night
- One-click ordering have it printed and delivered, auto-priced by size, with a copyright and trademark check
Where it gets powerful
The advanced end.
The features that take a sketch all the way to a finished piece, and the reason this is a design studio, not a converter.
Interlocked and woven forms
Micro Trim removes overlapping lines one at a time, so two rings become truly interconnected: chain links, figure-eights, woven motifs. It still builds as one clean, watertight cutter with the full frame, base and support settings intact.
Flat art, real depth
Relief mode inflates a flat drawing into genuine 3D, with domes, puffs and soft height across detailed multi-motif designs. It is the front end for stamps, embossers and mould masters.
Open-face moulds
Turn any relief into a single-sided mould with no parting line, ready for press-moulding or casting a silicone master. Detailed textures, no clean-up seam.
Endless pattern tiling
Build a 2×2 seamless tile and wrap it around a roller or repeat it through a stencil, for continuous, join-free texture at any length.
Reusable linked motifs
A design system for clay. Save a motif once, reuse it everywhere as a linked copy, and edit the master to update every design at once.
Print-true by construction
Sharp blades, tolerance-tuned threaded grips, wall-aware snapping, print check and a watertight export. Every piece is built to slice and print first time, not patched afterwards.
Put together
From sketch to clay.
The tools are built to chain together, so a single session can take you from an idea to a finished, printable piece.
From a picture to a print
Trace an image, auto-clean it, shape it, and send it straight to a bladed cutter with a base and handle.
- Trace photo
- Shape and trim
- 3D cutter
- STL or order
Intricate multi-motif designs
Combine, mirror and radial-repeat, then Micro Trim the overlaps into one interlaced, watertight piece.
- Combine
- Radial and mirror
- Micro Trim
- One solid
Flat design to pressable mould
Inflate flat artwork with relief mode, then flip it into an open-face mould for pressing or casting.
- Flat art
- Relief mode
- Open-face mould
Sketch to finished tool
Any design becomes a threaded-grip stamp or cutter, print-checked, then exported or ordered and delivered to you.
- Design
- Grip stamp or cutter
- Print check
- Order
No generative AI
There is no prompt box. Every line is yours.
Nothing is typed into existence
You can’t describe what you want and have a machine invent it. Every shape starts with your hand: your drawing, your photo, your motif.
Made by you, and you know it
This is a tool for artists who want to create their own pieces. When you sell or wear it, you know you designed it yourself, and that is worth being proud of.
One of a kind, not a repeat
No shared prompts means no lookalike designs. Your pieces are yours alone, not a variation of what everyone else is generating.
Start drawing, free.
Design, build in 3D, print or order. The drawing tools are free with no time limit. Upgrade to Kalfa or Usta when you’re ready to build in 3D, print and order.